Writing an Abstract for Your Research Paper
Definition and Purpose of Abstracts
An abstract is a short summary of your (published or unpublished) research paper, usually about a paragraph (c. 6-7 sentences, 150-250 words) long. A well-written abstract serves multiple purposes:
- an abstract lets readers get the gist or essence of your paper or article quickly, in order to decide whether to read the full paper;
- an abstract prepares readers to follow the detailed information, analyses, and arguments in your full paper;
- and, later, an abstract helps readers remember key points from your paper.
It’s also worth remembering that search engines and bibliographic databases use abstracts, as well as the title, to identify key terms for indexing your published paper. So what you include in your abstract and in your title are crucial for helping other researchers find your paper or article.
If you are writing an abstract for a course paper, your professor may give you specific guidelines for what to include and how to organize your abstract. Similarly, academic journals often have specific requirements for abstracts. So in addition to following the advice on this page, you should be sure to look for and follow any guidelines from the course or journal you’re writing for.
The Contents of an Abstract
Abstracts contain most of the following kinds of information in brief form. The body of your paper will, of course, develop and explain these ideas much more fully. As you will see in the samples below, the proportion of your abstract that you devote to each kind of information—and the sequence of that information—will vary, depending on the nature and genre of the paper that you are summarizing in your abstract. And in some cases, some of this information is implied, rather than stated explicitly. The Publication Manual of the American Psychological Association , which is widely used in the social sciences, gives specific guidelines for what to include in the abstract for different kinds of papers—for empirical studies, literature reviews or meta-analyses, theoretical papers, methodological papers, and case studies.
Here are the typical kinds of information found in most abstracts:
- the context or background information for your research; the general topic under study; the specific topic of your research
- the central questions or statement of the problem your research addresses
- what’s already known about this question, what previous research has done or shown
- the main reason(s) , the exigency, the rationale , the goals for your research—Why is it important to address these questions? Are you, for example, examining a new topic? Why is that topic worth examining? Are you filling a gap in previous research? Applying new methods to take a fresh look at existing ideas or data? Resolving a dispute within the literature in your field? . . .
- your research and/or analytical methods
- your main findings , results , or arguments
- the significance or implications of your findings or arguments.
Your abstract should be intelligible on its own, without a reader’s having to read your entire paper. And in an abstract, you usually do not cite references—most of your abstract will describe what you have studied in your research and what you have found and what you argue in your paper. In the body of your paper, you will cite the specific literature that informs your research.
When to Write Your Abstract
Although you might be tempted to write your abstract first because it will appear as the very first part of your paper, it’s a good idea to wait to write your abstract until after you’ve drafted your full paper, so that you know what you’re summarizing.
What follows are some sample abstracts in published papers or articles, all written by faculty at UW-Madison who come from a variety of disciplines. We have annotated these samples to help you see the work that these authors are doing within their abstracts.
Choosing Verb Tenses within Your Abstract
The social science sample (Sample 1) below uses the present tense to describe general facts and interpretations that have been and are currently true, including the prevailing explanation for the social phenomenon under study. That abstract also uses the present tense to describe the methods, the findings, the arguments, and the implications of the findings from their new research study. The authors use the past tense to describe previous research.
The humanities sample (Sample 2) below uses the past tense to describe completed events in the past (the texts created in the pulp fiction industry in the 1970s and 80s) and uses the present tense to describe what is happening in those texts, to explain the significance or meaning of those texts, and to describe the arguments presented in the article.
The science samples (Samples 3 and 4) below use the past tense to describe what previous research studies have done and the research the authors have conducted, the methods they have followed, and what they have found. In their rationale or justification for their research (what remains to be done), they use the present tense. They also use the present tense to introduce their study (in Sample 3, “Here we report . . .”) and to explain the significance of their study (In Sample 3, This reprogramming . . . “provides a scalable cell source for. . .”).
Sample Abstract 1
From the social sciences.
Reporting new findings about the reasons for increasing economic homogamy among spouses
Gonalons-Pons, Pilar, and Christine R. Schwartz. “Trends in Economic Homogamy: Changes in Assortative Mating or the Division of Labor in Marriage?” Demography , vol. 54, no. 3, 2017, pp. 985-1005.
Sample Abstract 2
From the humanities.
Analyzing underground pulp fiction publications in Tanzania, this article makes an argument about the cultural significance of those publications
Emily Callaci. “Street Textuality: Socialism, Masculinity, and Urban Belonging in Tanzania’s Pulp Fiction Publishing Industry, 1975-1985.” Comparative Studies in Society and History , vol. 59, no. 1, 2017, pp. 183-210.
Sample Abstract/Summary 3
From the sciences.
Reporting a new method for reprogramming adult mouse fibroblasts into induced cardiac progenitor cells
Lalit, Pratik A., Max R. Salick, Daryl O. Nelson, Jayne M. Squirrell, Christina M. Shafer, Neel G. Patel, Imaan Saeed, Eric G. Schmuck, Yogananda S. Markandeya, Rachel Wong, Martin R. Lea, Kevin W. Eliceiri, Timothy A. Hacker, Wendy C. Crone, Michael Kyba, Daniel J. Garry, Ron Stewart, James A. Thomson, Karen M. Downs, Gary E. Lyons, and Timothy J. Kamp. “Lineage Reprogramming of Fibroblasts into Proliferative Induced Cardiac Progenitor Cells by Defined Factors.” Cell Stem Cell , vol. 18, 2016, pp. 354-367.
Sample Abstract 4, a Structured Abstract
Reporting results about the effectiveness of antibiotic therapy in managing acute bacterial sinusitis, from a rigorously controlled study
Note: This journal requires authors to organize their abstract into four specific sections, with strict word limits. Because the headings for this structured abstract are self-explanatory, we have chosen not to add annotations to this sample abstract.
Wald, Ellen R., David Nash, and Jens Eickhoff. “Effectiveness of Amoxicillin/Clavulanate Potassium in the Treatment of Acute Bacterial Sinusitis in Children.” Pediatrics , vol. 124, no. 1, 2009, pp. 9-15.
“OBJECTIVE: The role of antibiotic therapy in managing acute bacterial sinusitis (ABS) in children is controversial. The purpose of this study was to determine the effectiveness of high-dose amoxicillin/potassium clavulanate in the treatment of children diagnosed with ABS.
METHODS : This was a randomized, double-blind, placebo-controlled study. Children 1 to 10 years of age with a clinical presentation compatible with ABS were eligible for participation. Patients were stratified according to age (<6 or ≥6 years) and clinical severity and randomly assigned to receive either amoxicillin (90 mg/kg) with potassium clavulanate (6.4 mg/kg) or placebo. A symptom survey was performed on days 0, 1, 2, 3, 5, 7, 10, 20, and 30. Patients were examined on day 14. Children’s conditions were rated as cured, improved, or failed according to scoring rules.
RESULTS: Two thousand one hundred thirty-five children with respiratory complaints were screened for enrollment; 139 (6.5%) had ABS. Fifty-eight patients were enrolled, and 56 were randomly assigned. The mean age was 6630 months. Fifty (89%) patients presented with persistent symptoms, and 6 (11%) presented with nonpersistent symptoms. In 24 (43%) children, the illness was classified as mild, whereas in the remaining 32 (57%) children it was severe. Of the 28 children who received the antibiotic, 14 (50%) were cured, 4 (14%) were improved, 4(14%) experienced treatment failure, and 6 (21%) withdrew. Of the 28children who received placebo, 4 (14%) were cured, 5 (18%) improved, and 19 (68%) experienced treatment failure. Children receiving the antibiotic were more likely to be cured (50% vs 14%) and less likely to have treatment failure (14% vs 68%) than children receiving the placebo.
CONCLUSIONS : ABS is a common complication of viral upper respiratory infections. Amoxicillin/potassium clavulanate results in significantly more cures and fewer failures than placebo, according to parental report of time to resolution.” (9)
Some Excellent Advice about Writing Abstracts for Basic Science Research Papers, by Professor Adriano Aguzzi from the Institute of Neuropathology at the University of Zurich:
Academic and Professional Writing
This is an accordion element with a series of buttons that open and close related content panels.
Analysis Papers
Reading Poetry
A Short Guide to Close Reading for Literary Analysis
Using Literary Quotations
Play Reviews
Writing a Rhetorical Précis to Analyze Nonfiction Texts
Incorporating Interview Data
Grant Proposals
Planning and Writing a Grant Proposal: The Basics
Additional Resources for Grants and Proposal Writing
Job Materials and Application Essays
Writing Personal Statements for Academic Programs within an Undergraduate College
Writing Personal Statements for Ph.D. Programs
- Before you begin: useful tips for writing your essay
- Guided brainstorming exercises
- Get more help with your essay
- Frequently Asked Questions
Resume Writing Tips
CV Writing Tips
Cover Letters
Business Letters
Diversity Statements
Professional Emails
Advice for Students Writing a Professional Email
Proposals and Dissertations
Resources for Proposal Writers
Resources for Dissertators
Research Papers
Planning and Writing Research Papers
Quoting and Paraphrasing
Writing Annotated Bibliographies
Creating Poster Presentations
Thank-You Notes
Advice for Students Writing Thank-You Notes to Donors
Reading for a Review
Critical Reviews
Writing a Review of Literature
Scientific Reports
Scientific Report Format
Sample Lab Assignment
Writing for the Web
Writing an Effective Blog Post
Writing for Social Media: A Guide for Academics
Academic & Employability Skills
Subscribe to academic & employability skills.
Enter your email address to subscribe to this blog and receive notifications of new posts by email.
Email Address
Writing an abstract - a six point checklist (with samples)
Posted in: abstract , dissertations
The abstract is a vital part of any research paper. It is the shop front for your work, and the first stop for your reader. It should provide a clear and succinct summary of your study, and encourage your readers to read more. An effective abstract, therefore should answer the following questions:
- Why did you do this study or project?
- What did you do and how?
- What did you find?
- What do your findings mean?
So here's our run down of the key elements of a well-written abstract.
- Size - A succinct and well written abstract should be between approximately 100- 250 words.
- Background - An effective abstract usually includes some scene-setting information which might include what is already known about the subject, related to the paper in question (a few short sentences).
- Purpose - The abstract should also set out the purpose of your research, in other words, what is not known about the subject and hence what the study intended to examine (or what the paper seeks to present).
- Methods - The methods section should contain enough information to enable the reader to understand what was done, and how. It should include brief details of the research design, sample size, duration of study, and so on.
- Results - The results section is the most important part of the abstract. This is because readers who skim an abstract do so to learn about the findings of the study. The results section should therefore contain as much detail about the findings as the journal word count permits.
- Conclusion - This section should contain the most important take-home message of the study, expressed in a few precisely worded sentences. Usually, the finding highlighted here relates to the primary outcomes of the study. However, other important or unexpected findings should also be mentioned. It is also customary, but not essential, to express an opinion about the theoretical or practical implications of the findings, or the importance of their findings for the field. Thus, the conclusions may contain three elements:
- The primary take-home message.
- Any additional findings of importance.
- Implications for future studies.
Example Abstract 2: Engineering Development and validation of a three-dimensional finite element model of the pelvic bone.
Abstract from: Dalstra, M., Huiskes, R. and Van Erning, L., 1995. Development and validation of a three-dimensional finite element model of the pelvic bone. Journal of biomechanical engineering, 117(3), pp.272-278.
And finally... A word on abstract types and styles
Abstract types can differ according to subject discipline. You need to determine therefore which type of abstract you should include with your paper. Here are two of the most common types with examples.
Informative Abstract
The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.
Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgements about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarised. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less.
Adapted from Andrade C. How to write a good abstract for a scientific paper or conference presentation. Indian J Psychiatry. 2011 Apr;53(2):172-5. doi: 10.4103/0019-5545.82558. PMID: 21772657; PMCID: PMC3136027 .
Have you seen?
Share this:.
- Click to print (Opens in new window)
- Click to email a link to a friend (Opens in new window)
- Click to share on WhatsApp (Opens in new window)
- Click to share on LinkedIn (Opens in new window)
- Click to share on Twitter (Opens in new window)
- Click to share on Facebook (Opens in new window)
Click here to cancel reply.
- Email * (we won't publish this)
Write a response
Critical Writing
How you can be a better critical writer: going beyond description Have you ever handed in a piece of writing – an essay or report, for example – and got comments back from your tutor saying that it needs to...
Navigating the dissertation process: my tips for final years
Imagine for a moment... After months of hard work and research on a topic you're passionate about, the time has finally come to click the 'Submit' button on your dissertation. You've just completed your longest project to date as part...
8 ways to beat procrastination
Whether you’re writing an assignment or revising for exams, getting started can be hard. Fortunately, there’s lots you can do to turn procrastination into action.
Get 50% OFF Yearly and Lifetime Plans This Black Friday
How to Write an Abstract (With Examples)
By Sarah Oakley
Table of Contents
What is an abstract in a paper, how long should an abstract be, 5 steps for writing an abstract, examples of an abstract, how prowritingaid can help you write an abstract.
If you are writing a scientific research paper or a book proposal, you need to know how to write an abstract, which summarizes the contents of the paper or book.
When researchers are looking for peer-reviewed papers to use in their studies, the first place they will check is the abstract to see if it applies to their work. Therefore, your abstract is one of the most important parts of your entire paper.
In this article, we’ll explain what an abstract is, what it should include, and how to write one.
An abstract is a concise summary of the details within a report. Some abstracts give more details than others, but the main things you’ll be talking about are why you conducted the research, what you did, and what the results show.
When a reader is deciding whether to read your paper completely, they will first look at the abstract. You need to be concise in your abstract and give the reader the most important information so they can determine if they want to read the whole paper.
Remember that an abstract is the last thing you’ll want to write for the research paper because it directly references parts of the report. If you haven’t written the report, you won’t know what to include in your abstract.
If you are writing a paper for a journal or an assignment, the publication or academic institution might have specific formatting rules for how long your abstract should be. However, if they don’t, most abstracts are between 150 and 300 words long.
A short word count means your writing has to be precise and without filler words or phrases. Once you’ve written a first draft, you can always use an editing tool, such as ProWritingAid, to identify areas where you can reduce words and increase readability.
If your abstract is over the word limit, and you’ve edited it but still can’t figure out how to reduce it further, your abstract might include some things that aren’t needed. Here’s a list of three elements you can remove from your abstract:
Discussion : You don’t need to go into detail about the findings of your research because your reader will find your discussion within the paper.
Definition of terms : Your readers are interested the field you are writing about, so they are likely to understand the terms you are using. If not, they can always look them up. Your readers do not expect you to give a definition of terms in your abstract.
References and citations : You can mention there have been studies that support or have inspired your research, but you do not need to give details as the reader will find them in your bibliography.
Good writing = better grades
ProWritingAid will help you improve the style, strength, and clarity of all your assignments.
If you’ve never written an abstract before, and you’re wondering how to write an abstract, we’ve got some steps for you to follow. It’s best to start with planning your abstract, so we’ve outlined the details you need to include in your plan before you write.
Remember to consider your audience when you’re planning and writing your abstract. They are likely to skim read your abstract, so you want to be sure your abstract delivers all the information they’re expecting to see at key points.
1. What Should an Abstract Include?
Abstracts have a lot of information to cover in a short number of words, so it’s important to know what to include. There are three elements that need to be present in your abstract:
Your context is the background for where your research sits within your field of study. You should briefly mention any previous scientific papers or experiments that have led to your hypothesis and how research develops in those studies.
Your hypothesis is your prediction of what your study will show. As you are writing your abstract after you have conducted your research, you should still include your hypothesis in your abstract because it shows the motivation for your paper.
Throughout your abstract, you also need to include keywords and phrases that will help researchers to find your article in the databases they’re searching. Make sure the keywords are specific to your field of study and the subject you’re reporting on, otherwise your article might not reach the relevant audience.
2. Can You Use First Person in an Abstract?
You might think that first person is too informal for a research paper, but it’s not. Historically, writers of academic reports avoided writing in first person to uphold the formality standards of the time. However, first person is more accepted in research papers in modern times.
If you’re still unsure whether to write in first person for your abstract, refer to any style guide rules imposed by the journal you’re writing for or your teachers if you are writing an assignment.
3. Abstract Structure
Some scientific journals have strict rules on how to structure an abstract, so it’s best to check those first. If you don’t have any style rules to follow, try using the IMRaD structure, which stands for Introduction, Methodology, Results, and Discussion.
Following the IMRaD structure, start with an introduction. The amount of background information you should include depends on your specific research area. Adding a broad overview gives you less room to include other details. Remember to include your hypothesis in this section.
The next part of your abstract should cover your methodology. Try to include the following details if they apply to your study:
What type of research was conducted?
How were the test subjects sampled?
What were the sample sizes?
What was done to each group?
How long was the experiment?
How was data recorded and interpreted?
Following the methodology, include a sentence or two about the results, which is where your reader will determine if your research supports or contradicts their own investigations.
The results are also where most people will want to find out what your outcomes were, even if they are just mildly interested in your research area. You should be specific about all the details but as concise as possible.
The last few sentences are your conclusion. It needs to explain how your findings affect the context and whether your hypothesis was correct. Include the primary take-home message, additional findings of importance, and perspective. Also explain whether there is scope for further research into the subject of your report.
Your conclusion should be honest and give the reader the ultimate message that your research shows. Readers trust the conclusion, so make sure you’re not fabricating the results of your research. Some readers won’t read your entire paper, but this section will tell them if it’s worth them referencing it in their own study.
4. How to Start an Abstract
The first line of your abstract should give your reader the context of your report by providing background information. You can use this sentence to imply the motivation for your research.
You don’t need to use a hook phrase or device in your first sentence to grab the reader’s attention. Your reader will look to establish relevance quickly, so readability and clarity are more important than trying to persuade the reader to read on.
5. How to Format an Abstract
Most abstracts use the same formatting rules, which help the reader identify the abstract so they know where to look for it.
Here’s a list of formatting guidelines for writing an abstract:
Stick to one paragraph
Use block formatting with no indentation at the beginning
Put your abstract straight after the title and acknowledgements pages
Use present or past tense, not future tense
There are two primary types of abstract you could write for your paper—descriptive and informative.
An informative abstract is the most common, and they follow the structure mentioned previously. They are longer than descriptive abstracts because they cover more details.
Descriptive abstracts differ from informative abstracts, as they don’t include as much discussion or detail. The word count for a descriptive abstract is between 50 and 150 words.
Here is an example of an informative abstract:
A growing trend exists for authors to employ a more informal writing style that uses “we” in academic writing to acknowledge one’s stance and engagement. However, few studies have compared the ways in which the first-person pronoun “we” is used in the abstracts and conclusions of empirical papers. To address this lacuna in the literature, this study conducted a systematic corpus analysis of the use of “we” in the abstracts and conclusions of 400 articles collected from eight leading electrical and electronic (EE) engineering journals. The abstracts and conclusions were extracted to form two subcorpora, and an integrated framework was applied to analyze and seek to explain how we-clusters and we-collocations were employed. Results revealed whether authors’ use of first-person pronouns partially depends on a journal policy. The trend of using “we” showed that a yearly increase occurred in the frequency of “we” in EE journal papers, as well as the existence of three “we-use” types in the article conclusions and abstracts: exclusive, inclusive, and ambiguous. Other possible “we-use” alternatives such as “I” and other personal pronouns were used very rarely—if at all—in either section. These findings also suggest that the present tense was used more in article abstracts, but the present perfect tense was the most preferred tense in article conclusions. Both research and pedagogical implications are proffered and critically discussed.
Wang, S., Tseng, W.-T., & Johanson, R. (2021). To We or Not to We: Corpus-Based Research on First-Person Pronoun Use in Abstracts and Conclusions. SAGE Open, 11(2).
Here is an example of a descriptive abstract:
From the 1850s to the present, considerable criminological attention has focused on the development of theoretically-significant systems for classifying crime. This article reviews and attempts to evaluate a number of these efforts, and we conclude that further work on this basic task is needed. The latter part of the article explicates a conceptual foundation for a crime pattern classification system, and offers a preliminary taxonomy of crime.
Farr, K. A., & Gibbons, D. C. (1990). Observations on the Development of Crime Categories. International Journal of Offender Therapy and Comparative Criminology, 34(3), 223–237.
If you want to ensure your abstract is grammatically correct and easy to read, you can use ProWritingAid to edit it. The software integrates with Microsoft Word, Google Docs, and most web browsers, so you can make the most of it wherever you’re writing your paper.
Before you edit with ProWritingAid, make sure the suggestions you are seeing are relevant for your document by changing the document type to “Abstract” within the Academic writing style section.
You can use the Readability report to check your abstract for places to improve the clarity of your writing. Some suggestions might show you where to remove words, which is great if you’re over your word count.
We hope the five steps and examples we’ve provided help you write a great abstract for your research paper.
Sarah Oakley
Get started with prowritingaid.
All features—half price
Save 50% on yearly and lifetime plans
this Black Friday.
Grab the discount while it lasts.
Visit our Help Center or let's stay in touch via:
- PRO Courses Guides New Tech Help Pro Expert Videos About wikiHow Pro Upgrade Sign In
- EDIT Edit this Article
- EXPLORE Tech Help Pro About Us Random Article Quizzes Request a New Article Community Dashboard This Or That Game Forums Popular Categories Arts and Entertainment Artwork Books Movies Computers and Electronics Computers Phone Skills Technology Hacks Health Men's Health Mental Health Women's Health Relationships Dating Love Relationship Issues Hobbies and Crafts Crafts Drawing Games Education & Communication Communication Skills Personal Development Studying Personal Care and Style Fashion Hair Care Personal Hygiene Youth Personal Care School Stuff Dating All Categories Arts and Entertainment Finance and Business Home and Garden Relationship Quizzes Cars & Other Vehicles Food and Entertaining Personal Care and Style Sports and Fitness Computers and Electronics Health Pets and Animals Travel Education & Communication Hobbies and Crafts Philosophy and Religion Work World Family Life Holidays and Traditions Relationships Youth
- Browse Articles
- Learn Something New
- Quizzes Hot
- Happiness Hub
- This Or That Game
- Train Your Brain
- Explore More
- Support wikiHow
- About wikiHow
- Log in / Sign up
- Education and Communications
- Science Writing
How to Write an Abstract
Last Updated: May 6, 2021 Approved
This article was co-authored by Megan Callaghan, PhD . Megan Morgan is an Academic Advising and Writing expert based in Augusta, Georgia. She has over 7 years of university teaching experience and more than 15 years of professional editing experience. She works as an intern for the Law Library of Congress, and is also a Professional Writing Center Consultant at Augusta University. Her key academic interests involve reference and subject librarianship, government information, and information organization. She provides personalized writing instruction, workshops, and support for AU students, faculty, and staff. Previously, she worked as a Graduate Program Administrator at the University of Georgia’s School of Public and International Affairs. She was a Graduate Advisor for three degrees in the departments of Political Science and International Affairs at the University of Georgia College of Arts and Sciences. She earned her Master’s in Library and Information Science from Valdosta State University. She also received both a PhD and MA in English from The University of Georgia, and a BA in English and Creative Writing from the Mississippi University for Women. She wrote her PhD dissertation on narrative structure and social change in novels by 18th-century British women writers. There are 11 references cited in this article, which can be found at the bottom of the page. wikiHow marks an article as reader-approved once it receives enough positive feedback. This article received 60 testimonials and 86% of readers who voted found it helpful, earning it our reader-approved status. This article has been viewed 4,919,471 times.
If you need to write an abstract for an academic or scientific paper, don't panic! Your abstract is simply a short, stand-alone summary of the work or paper that others can use as an overview. [1] X Trustworthy Source University of North Carolina Writing Center UNC's on-campus and online instructional service that provides assistance to students, faculty, and others during the writing process Go to source An abstract describes what you do in your essay, whether it’s a scientific experiment or a literary analysis paper. It should help your reader understand the paper and help people searching for this paper decide whether it suits their purposes prior to reading. To write an abstract, finish your paper first, then type a summary that identifies the purpose, problem, methods, results, and conclusion of your work. After you get the details down, all that's left is to format it correctly. Since an abstract is only a summary of the work you've already done, it's easy to accomplish!
Getting Your Abstract Started
- A thesis and an abstract are entirely different things. The thesis of a paper introduces the main idea or question, while the abstract works to review the entirety of the paper, including the methods and results.
- Even if you think that you know what your paper is going to be about, always save the abstract for last. You will be able to give a much more accurate summary if you do just that - summarize what you've already written.
- Is there a maximum or minimum length?
- Are there style requirements?
- Are you writing for an instructor or a publication?
- Will other academics in your field read this abstract?
- Should it be accessible to a lay reader or somebody from another field?
- Descriptive abstracts explain the purpose, goal, and methods of your research but leave out the results section. These are typically only 100-200 words.
- Informative abstracts are like a condensed version of your paper, giving an overview of everything in your research including the results. These are much longer than descriptive abstracts, and can be anywhere from a single paragraph to a whole page long. [4] X Research source
- The basic information included in both styles of abstract is the same, with the main difference being that the results are only included in an informative abstract, and an informative abstract is much longer than a descriptive one.
- A critical abstract is not often used, but it may be required in some courses. A critical abstract accomplishes the same goals as the other types of abstract, but will also relate the study or work being discussed to the writer’s own research. It may critique the research design or methods. [5] X Trustworthy Source University of North Carolina Writing Center UNC's on-campus and online instructional service that provides assistance to students, faculty, and others during the writing process Go to source
Writing Your Abstract
- Why did you decide to do this study or project?
- How did you conduct your research?
- What did you find?
- Why is this research and your findings important?
- Why should someone read your entire essay?
- What problem is your research trying to better understand or solve?
- What is the scope of your study - a general problem, or something specific?
- What is your main claim or argument?
- Discuss your own research including the variables and your approach.
- Describe the evidence you have to support your claim
- Give an overview of your most important sources.
- What answer did you reach from your research or study?
- Was your hypothesis or argument supported?
- What are the general findings?
- What are the implications of your work?
- Are your results general or very specific?
Formatting Your Abstract
- Many journals have specific style guides for abstracts. If you’ve been given a set of rules or guidelines, follow them to the letter. [8] X Trustworthy Source PubMed Central Journal archive from the U.S. National Institutes of Health Go to source
- Avoid using direct acronyms or abbreviations in the abstract, as these will need to be explained in order to make sense to the reader. That uses up precious writing room, and should generally be avoided.
- If your topic is about something well-known enough, you can reference the names of people or places that your paper focuses on.
- Don’t include tables, figures, sources, or long quotations in your abstract. These take up too much room and usually aren’t what your readers want from an abstract anyway. [9] X Research source
- For example, if you’re writing a paper on the cultural differences in perceptions of schizophrenia, be sure to use words like “schizophrenia,” “cross-cultural,” “culture-bound,” “mental illness,” and “societal acceptance.” These might be search terms people use when looking for a paper on your subject.
- Make sure to avoid jargon. This specialized vocabulary may not be understood by general readers in your area and can cause confusion. [12] X Research source
- Consulting with your professor, a colleague in your field, or a tutor or writing center consultant can be very helpful. If you have these resources available to you, use them!
- Asking for assistance can also let you know about any conventions in your field. For example, it is very common to use the passive voice (“experiments were performed”) in the sciences. However, in the humanities active voice is usually preferred.
Sample Abstracts and Outline
Community Q&A
- Abstracts are typically a paragraph or two and should be no more than 10% of the length of the full essay. Look at other abstracts in similar publications for an idea of how yours should go. [13] X Research source Thanks Helpful 0 Not Helpful 0
- Consider carefully how technical the paper or the abstract should be. It is often reasonable to assume that your readers have some understanding of your field and the specific language it entails, but anything you can do to make the abstract more easily readable is a good thing. Thanks Helpful 2 Not Helpful 0
You Might Also Like
- ↑ http://writingcenter.unc.edu/handouts/abstracts/
- ↑ http://writing.wisc.edu/Handbook/presentations_abstracts_examples.html
- ↑ http://owl.english.purdue.edu/owl/resource/656/1/
- ↑ https://www.ece.cmu.edu/~koopman/essays/abstract.html
- ↑ https://owl.english.purdue.edu/owl/resource/656/1/
- ↑ http://www.ncbi.nlm.nih.gov/pmc/articles/PMC3136027/
- ↑ http://writing.wisc.edu/Handbook/presentations_abstracts.html
About This Article
To write an abstract, start with a short paragraph that explains the purpose of your paper and what it's about. Then, write a paragraph explaining any arguments or claims you make in your paper. Follow that with a third paragraph that details the research methods you used and any evidence you found for your claims. Finally, conclude your abstract with a brief section that tells readers why your findings are important. To learn how to properly format your abstract, read the article! Did this summary help you? Yes No
- Send fan mail to authors
Reader Success Stories
May 21, 2017
Did this article help you?
Rohit Payal
Aug 5, 2018
Nila Anggreni Roni
Feb 6, 2017
Aug 27, 2019
Mike Bossert
Dec 27, 2017
Featured Articles
Trending Articles
Watch Articles
- Terms of Use
- Privacy Policy
- Do Not Sell or Share My Info
- Not Selling Info
wikiHow Tech Help Pro:
Develop the tech skills you need for work and life
IMAGES
VIDEO
COMMENTS
The abstract concisely reports the aims and outcomes of your research, so that readers know exactly what your paper is about. Although the structure may vary slightly depending on your discipline, your abstract should describe the purpose of your work, the methods you've used, and the conclusions you've drawn.
Definition and Purpose of Abstracts An abstract is a short summary of your (published or unpublished) research paper, usually about a paragraph (c. 6-7 sentences, 150-250 words) long. A well-written abstract serves multiple purposes: an abstract lets readers get the gist or essence of your paper or article quickly, in order to decide whether to…
An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.
You'll also discover new implications as you write, and perhaps even shift the structure a bit. In any event, you're better prepared to write the abstract once the main paper is completed. 3 Abstracts are not introductions. A common misconception is to write your abstract like an introduction — after all, it's the first section of your ...
Put your abstract straight after the title and acknowledgements pages. Use present or past tense, not future tense. Examples of an Abstract. There are two primary types of abstract you could write for your paper—descriptive and informative. An informative abstract is the most common, and they follow the structure mentioned previously.
An abstract is a 150- to 250-word paragraph that provides readers with a quick overview of your essay or report and its organization. It should express your thesis (or central idea) and your key points; it should also suggest any implications or applications of the research you discuss in the paper.
determine whether to include an abstract and/or keywords. ABSTRACT: The abstract needs to provide a brief but comprehensive summary of the contents of your paper. It provides an overview of the paper and helps readers decide whether to read the full text. Limit your abstract to 250 words. 1. Abstract Content . The abstract addresses the following
Readers often decide whether or not to read the full document solely on the basis of the abstract, so learning to write a good one is essential. You will also need to create an abstract if you are writing a thesis or dissertation at Texas A&M. Two Types of Abstracts The informative abstract is a brief description of a document's contents. It ...
An APA abstract should be 1 paragraph and approximately 250 words long. Put the title of your paper at the top of the page, aligned left in all caps, and the page number on the right. On the first line, write "Abstract" and center it over the body of the text. Write your abstract under that as a single paragraph with no indentations.
Follow these five steps to format your abstract in APA Style: Insert a running head (for a professional paper—not needed for a student paper) and page number. Set page margins to 1 inch (2.54 cm). Write "Abstract" (bold and centered) at the top of the page. Place the contents of your abstract on the next line. Do not indent the first line.