abstract in term paper

Writing an Abstract for Your Research Paper

Definition and Purpose of Abstracts

An abstract is a short summary of your (published or unpublished) research paper, usually about a paragraph (c. 6-7 sentences, 150-250 words) long. A well-written abstract serves multiple purposes:

• an abstract lets readers get the gist or essence of your paper or article quickly, in order to decide whether to read the full paper;
• an abstract prepares readers to follow the detailed information, analyses, and arguments in your full paper;
• and, later, an abstract helps readers remember key points from your paper.

It’s also worth remembering that search engines and bibliographic databases use abstracts, as well as the title, to identify key terms for indexing your published paper. So what you include in your abstract and in your title are crucial for helping other researchers find your paper or article.

If you are writing an abstract for a course paper, your professor may give you specific guidelines for what to include and how to organize your abstract. Similarly, academic journals often have specific requirements for abstracts. So in addition to following the advice on this page, you should be sure to look for and follow any guidelines from the course or journal you’re writing for.

The Contents of an Abstract

Abstracts contain most of the following kinds of information in brief form. The body of your paper will, of course, develop and explain these ideas much more fully. As you will see in the samples below, the proportion of your abstract that you devote to each kind of information—and the sequence of that information—will vary, depending on the nature and genre of the paper that you are summarizing in your abstract. And in some cases, some of this information is implied, rather than stated explicitly. The Publication Manual of the American Psychological Association , which is widely used in the social sciences, gives specific guidelines for what to include in the abstract for different kinds of papers—for empirical studies, literature reviews or meta-analyses, theoretical papers, methodological papers, and case studies.

Here are the typical kinds of information found in most abstracts:

• the context or background information for your research; the general topic under study; the specific topic of your research
• the central questions or statement of the problem your research addresses
• what’s already known about this question, what previous research has done or shown
• the main reason(s) , the exigency, the rationale , the goals for your research—Why is it important to address these questions? Are you, for example, examining a new topic? Why is that topic worth examining? Are you filling a gap in previous research? Applying new methods to take a fresh look at existing ideas or data? Resolving a dispute within the literature in your field? . . .
• your research and/or analytical methods
• your main findings , results , or arguments
• the significance or implications of your findings or arguments.

Your abstract should be intelligible on its own, without a reader’s having to read your entire paper. And in an abstract, you usually do not cite references—most of your abstract will describe what you have studied in your research and what you have found and what you argue in your paper. In the body of your paper, you will cite the specific literature that informs your research.

When to Write Your Abstract

Although you might be tempted to write your abstract first because it will appear as the very first part of your paper, it’s a good idea to wait to write your abstract until after you’ve drafted your full paper, so that you know what you’re summarizing.

What follows are some sample abstracts in published papers or articles, all written by faculty at UW-Madison who come from a variety of disciplines. We have annotated these samples to help you see the work that these authors are doing within their abstracts.

Choosing Verb Tenses within Your Abstract

The social science sample (Sample 1) below uses the present tense to describe general facts and interpretations that have been and are currently true, including the prevailing explanation for the social phenomenon under study. That abstract also uses the present tense to describe the methods, the findings, the arguments, and the implications of the findings from their new research study. The authors use the past tense to describe previous research.

The humanities sample (Sample 2) below uses the past tense to describe completed events in the past (the texts created in the pulp fiction industry in the 1970s and 80s) and uses the present tense to describe what is happening in those texts, to explain the significance or meaning of those texts, and to describe the arguments presented in the article.

The science samples (Samples 3 and 4) below use the past tense to describe what previous research studies have done and the research the authors have conducted, the methods they have followed, and what they have found. In their rationale or justification for their research (what remains to be done), they use the present tense. They also use the present tense to introduce their study (in Sample 3, “Here we report . . .”) and to explain the significance of their study (In Sample 3, This reprogramming . . . “provides a scalable cell source for. . .”).

Sample Abstract 1

From the social sciences.

Reporting new findings about the reasons for increasing economic homogamy among spouses

Gonalons-Pons, Pilar, and Christine R. Schwartz. “Trends in Economic Homogamy: Changes in Assortative Mating or the Division of Labor in Marriage?” Demography , vol. 54, no. 3, 2017, pp. 985-1005.

Sample Abstract 2

From the humanities.

Analyzing underground pulp fiction publications in Tanzania, this article makes an argument about the cultural significance of those publications

Emily Callaci. “Street Textuality: Socialism, Masculinity, and Urban Belonging in Tanzania’s Pulp Fiction Publishing Industry, 1975-1985.” Comparative Studies in Society and History , vol. 59, no. 1, 2017, pp. 183-210.

Sample Abstract/Summary 3

From the sciences.

Reporting a new method for reprogramming adult mouse fibroblasts into induced cardiac progenitor cells

Lalit, Pratik A., Max R. Salick, Daryl O. Nelson, Jayne M. Squirrell, Christina M. Shafer, Neel G. Patel, Imaan Saeed, Eric G. Schmuck, Yogananda S. Markandeya, Rachel Wong, Martin R. Lea, Kevin W. Eliceiri, Timothy A. Hacker, Wendy C. Crone, Michael Kyba, Daniel J. Garry, Ron Stewart, James A. Thomson, Karen M. Downs, Gary E. Lyons, and Timothy J. Kamp. “Lineage Reprogramming of Fibroblasts into Proliferative Induced Cardiac Progenitor Cells by Defined Factors.” Cell Stem Cell , vol. 18, 2016, pp. 354-367.

Sample Abstract 4, a Structured Abstract

Reporting results about the effectiveness of antibiotic therapy in managing acute bacterial sinusitis, from a rigorously controlled study

Note: This journal requires authors to organize their abstract into four specific sections, with strict word limits. Because the headings for this structured abstract are self-explanatory, we have chosen not to add annotations to this sample abstract.

Wald, Ellen R., David Nash, and Jens Eickhoff. “Effectiveness of Amoxicillin/Clavulanate Potassium in the Treatment of Acute Bacterial Sinusitis in Children.” Pediatrics , vol. 124, no. 1, 2009, pp. 9-15.

“OBJECTIVE: The role of antibiotic therapy in managing acute bacterial sinusitis (ABS) in children is controversial. The purpose of this study was to determine the effectiveness of high-dose amoxicillin/potassium clavulanate in the treatment of children diagnosed with ABS.

METHODS : This was a randomized, double-blind, placebo-controlled study. Children 1 to 10 years of age with a clinical presentation compatible with ABS were eligible for participation. Patients were stratified according to age (<6 or ≥6 years) and clinical severity and randomly assigned to receive either amoxicillin (90 mg/kg) with potassium clavulanate (6.4 mg/kg) or placebo. A symptom survey was performed on days 0, 1, 2, 3, 5, 7, 10, 20, and 30. Patients were examined on day 14. Children’s conditions were rated as cured, improved, or failed according to scoring rules.

RESULTS: Two thousand one hundred thirty-five children with respiratory complaints were screened for enrollment; 139 (6.5%) had ABS. Fifty-eight patients were enrolled, and 56 were randomly assigned. The mean age was 6630 months. Fifty (89%) patients presented with persistent symptoms, and 6 (11%) presented with nonpersistent symptoms. In 24 (43%) children, the illness was classified as mild, whereas in the remaining 32 (57%) children it was severe. Of the 28 children who received the antibiotic, 14 (50%) were cured, 4 (14%) were improved, 4(14%) experienced treatment failure, and 6 (21%) withdrew. Of the 28children who received placebo, 4 (14%) were cured, 5 (18%) improved, and 19 (68%) experienced treatment failure. Children receiving the antibiotic were more likely to be cured (50% vs 14%) and less likely to have treatment failure (14% vs 68%) than children receiving the placebo.

CONCLUSIONS : ABS is a common complication of viral upper respiratory infections. Amoxicillin/potassium clavulanate results in significantly more cures and fewer failures than placebo, according to parental report of time to resolution.” (9)

Some Excellent Advice about Writing Abstracts for Basic Science Research Papers, by Professor Adriano Aguzzi from the Institute of Neuropathology at the University of Zurich:

Academic and Professional Writing

This is an accordion element with a series of buttons that open and close related content panels.

Analysis Papers

Reading Poetry

A Short Guide to Close Reading for Literary Analysis

Using Literary Quotations

Play Reviews

Writing a Rhetorical Précis to Analyze Nonfiction Texts

Incorporating Interview Data

Grant Proposals

Planning and Writing a Grant Proposal: The Basics

Additional Resources for Grants and Proposal Writing

Job Materials and Application Essays

Writing Personal Statements for Academic Programs within an Undergraduate College

Writing Personal Statements for Ph.D. Programs

• Before you begin: useful tips for writing your essay
• Guided brainstorming exercises
• Get more help with your essay
• Frequently Asked Questions

Resume Writing Tips

CV Writing Tips

Cover Letters

Business Letters

Diversity Statements

Professional Emails

Advice for Students Writing a Professional Email

Proposals and Dissertations

Resources for Proposal Writers

Resources for Dissertators

Research Papers

Planning and Writing Research Papers

Quoting and Paraphrasing

Writing Annotated Bibliographies

Creating Poster Presentations

Thank-You Notes

Advice for Students Writing Thank-You Notes to Donors

Reading for a Review

Critical Reviews

Writing a Review of Literature

Scientific Reports

Scientific Report Format

Sample Lab Assignment

Writing for the Web

Writing an Effective Blog Post

Writing for Social Media: A Guide for Academics

How to Write an Abstract (With Examples)

By Sarah Oakley

Table of Contents

What is an abstract in a paper, how long should an abstract be, 5 steps for writing an abstract, examples of an abstract, how prowritingaid can help you write an abstract.

If you are writing a scientific research paper or a book proposal, you need to know how to write an abstract, which summarizes the contents of the paper or book.

When researchers are looking for peer-reviewed papers to use in their studies, the first place they will check is the abstract to see if it applies to their work. Therefore, your abstract is one of the most important parts of your entire paper.

In this article, we’ll explain what an abstract is, what it should include, and how to write one.

An abstract is a concise summary of the details within a report. Some abstracts give more details than others, but the main things you’ll be talking about are why you conducted the research, what you did, and what the results show.

When a reader is deciding whether to read your paper completely, they will first look at the abstract. You need to be concise in your abstract and give the reader the most important information so they can determine if they want to read the whole paper.

Remember that an abstract is the last thing you’ll want to write for the research paper because it directly references parts of the report. If you haven’t written the report, you won’t know what to include in your abstract.

If you are writing a paper for a journal or an assignment, the publication or academic institution might have specific formatting rules for how long your abstract should be. However, if they don’t, most abstracts are between 150 and 300 words long.

A short word count means your writing has to be precise and without filler words or phrases. Once you’ve written a first draft, you can always use an editing tool, such as ProWritingAid, to identify areas where you can reduce words and increase readability.

If your abstract is over the word limit, and you’ve edited it but still can’t figure out how to reduce it further, your abstract might include some things that aren’t needed. Here’s a list of three elements you can remove from your abstract:

Discussion : You don’t need to go into detail about the findings of your research because your reader will find your discussion within the paper.

Definition of terms : Your readers are interested the field you are writing about, so they are likely to understand the terms you are using. If not, they can always look them up. Your readers do not expect you to give a definition of terms in your abstract.

References and citations : You can mention there have been studies that support or have inspired your research, but you do not need to give details as the reader will find them in your bibliography.

Good writing = better grades

ProWritingAid will help you improve the style, strength, and clarity of all your assignments.

If you’ve never written an abstract before, and you’re wondering how to write an abstract, we’ve got some steps for you to follow. It’s best to start with planning your abstract, so we’ve outlined the details you need to include in your plan before you write.

Remember to consider your audience when you’re planning and writing your abstract. They are likely to skim read your abstract, so you want to be sure your abstract delivers all the information they’re expecting to see at key points.

1. What Should an Abstract Include?

Abstracts have a lot of information to cover in a short number of words, so it’s important to know what to include. There are three elements that need to be present in your abstract:

Your context is the background for where your research sits within your field of study. You should briefly mention any previous scientific papers or experiments that have led to your hypothesis and how research develops in those studies.

Your hypothesis is your prediction of what your study will show. As you are writing your abstract after you have conducted your research, you should still include your hypothesis in your abstract because it shows the motivation for your paper.

Throughout your abstract, you also need to include keywords and phrases that will help researchers to find your article in the databases they’re searching. Make sure the keywords are specific to your field of study and the subject you’re reporting on, otherwise your article might not reach the relevant audience.

2. Can You Use First Person in an Abstract?

You might think that first person is too informal for a research paper, but it’s not. Historically, writers of academic reports avoided writing in first person to uphold the formality standards of the time. However, first person is more accepted in research papers in modern times.

If you’re still unsure whether to write in first person for your abstract, refer to any style guide rules imposed by the journal you’re writing for or your teachers if you are writing an assignment.

3. Abstract Structure

Some scientific journals have strict rules on how to structure an abstract, so it’s best to check those first. If you don’t have any style rules to follow, try using the IMRaD structure, which stands for Introduction, Methodology, Results, and Discussion.

Following the IMRaD structure, start with an introduction. The amount of background information you should include depends on your specific research area. Adding a broad overview gives you less room to include other details. Remember to include your hypothesis in this section.

The next part of your abstract should cover your methodology. Try to include the following details if they apply to your study:

What type of research was conducted?

How were the test subjects sampled?

What were the sample sizes?

What was done to each group?

How long was the experiment?

How was data recorded and interpreted?

Following the methodology, include a sentence or two about the results, which is where your reader will determine if your research supports or contradicts their own investigations.

The results are also where most people will want to find out what your outcomes were, even if they are just mildly interested in your research area. You should be specific about all the details but as concise as possible.

The last few sentences are your conclusion. It needs to explain how your findings affect the context and whether your hypothesis was correct. Include the primary take-home message, additional findings of importance, and perspective. Also explain whether there is scope for further research into the subject of your report.

Your conclusion should be honest and give the reader the ultimate message that your research shows. Readers trust the conclusion, so make sure you’re not fabricating the results of your research. Some readers won’t read your entire paper, but this section will tell them if it’s worth them referencing it in their own study.

4. How to Start an Abstract

The first line of your abstract should give your reader the context of your report by providing background information. You can use this sentence to imply the motivation for your research.

You don’t need to use a hook phrase or device in your first sentence to grab the reader’s attention. Your reader will look to establish relevance quickly, so readability and clarity are more important than trying to persuade the reader to read on.

5. How to Format an Abstract

Most abstracts use the same formatting rules, which help the reader identify the abstract so they know where to look for it.

Here’s a list of formatting guidelines for writing an abstract:

Stick to one paragraph

Use block formatting with no indentation at the beginning

Put your abstract straight after the title and acknowledgements pages

Use present or past tense, not future tense

There are two primary types of abstract you could write for your paper—descriptive and informative.

An informative abstract is the most common, and they follow the structure mentioned previously. They are longer than descriptive abstracts because they cover more details.

Descriptive abstracts differ from informative abstracts, as they don’t include as much discussion or detail. The word count for a descriptive abstract is between 50 and 150 words.

Here is an example of an informative abstract:

A growing trend exists for authors to employ a more informal writing style that uses “we” in academic writing to acknowledge one’s stance and engagement. However, few studies have compared the ways in which the first-person pronoun “we” is used in the abstracts and conclusions of empirical papers. To address this lacuna in the literature, this study conducted a systematic corpus analysis of the use of “we” in the abstracts and conclusions of 400 articles collected from eight leading electrical and electronic (EE) engineering journals. The abstracts and conclusions were extracted to form two subcorpora, and an integrated framework was applied to analyze and seek to explain how we-clusters and we-collocations were employed. Results revealed whether authors’ use of first-person pronouns partially depends on a journal policy. The trend of using “we” showed that a yearly increase occurred in the frequency of “we” in EE journal papers, as well as the existence of three “we-use” types in the article conclusions and abstracts: exclusive, inclusive, and ambiguous. Other possible “we-use” alternatives such as “I” and other personal pronouns were used very rarely—if at all—in either section. These findings also suggest that the present tense was used more in article abstracts, but the present perfect tense was the most preferred tense in article conclusions. Both research and pedagogical implications are proffered and critically discussed.

Wang, S., Tseng, W.-T., & Johanson, R. (2021). To We or Not to We: Corpus-Based Research on First-Person Pronoun Use in Abstracts and Conclusions. SAGE Open, 11(2).

Here is an example of a descriptive abstract:

From the 1850s to the present, considerable criminological attention has focused on the development of theoretically-significant systems for classifying crime. This article reviews and attempts to evaluate a number of these efforts, and we conclude that further work on this basic task is needed. The latter part of the article explicates a conceptual foundation for a crime pattern classification system, and offers a preliminary taxonomy of crime.

Farr, K. A., & Gibbons, D. C. (1990). Observations on the Development of Crime Categories. International Journal of Offender Therapy and Comparative Criminology, 34(3), 223–237.

If you want to ensure your abstract is grammatically correct and easy to read, you can use ProWritingAid to edit it. The software integrates with Microsoft Word, Google Docs, and most web browsers, so you can make the most of it wherever you’re writing your paper.

Before you edit with ProWritingAid, make sure the suggestions you are seeing are relevant for your document by changing the document type to “Abstract” within the Academic writing style section.

You can use the Readability report to check your abstract for places to improve the clarity of your writing. Some suggestions might show you where to remove words, which is great if you’re over your word count.

We hope the five steps and examples we’ve provided help you write a great abstract for your research paper.

Sarah Oakley

Get started with prowritingaid.

Visit our Help Center or let's stay in touch via:

How to Write an Abstract in Research Papers (with Examples)

An abstract in research papers is a keyword-rich summary usually not exceeding 200-350 words. It can be considered the “face” of research papers because it creates an initial impression on the readers. While searching databases (such as PubMed) for research papers, a title is usually the first selection criterion for readers. If the title matches their search criteria, then the readers read the abstract, which sets the tone of the paper. Titles and abstracts are often the only freely available parts of research papers on journal websites. The pdf versions of full articles need to be purchased. Journal reviewers are often provided with only the title and abstract before they agree to review the complete paper. [ 1]  

Abstracts in research papers provide readers with a quick insight into what the paper is about to help them decide whether they want to read it further or not. Abstracts are the main selling points of articles and therefore should be carefully drafted, accurately highlighting the important aspects. [ 2]  

This article will help you identify the important components and provide tips on how to write an abstract in research papers effectively

What is an Abstract?  

An abstract in research papers can be defined as a synopsis of the paper. It should be clear, direct, self-contained, specific, unbiased, and concise. These summaries are published along with the complete research paper and are also submitted to conferences for consideration for presentation.  

Abstracts are of four types and journals can follow any of these formats: [ 2]  

• Structured  
• Unstructured  
• Descriptive  
• Informative  

Structured abstracts are used by most journals because they are more organized and have clear sections, usually including introduction/background; objective; design, settings, and participants (or materials and methods); outcomes and measures; results; and conclusion. These headings may differ based on the journal or the type of paper. Clinical trial abstracts should include the essential items mentioned in the CONSORT (Consolidated Standards Of Reporting Trials) guidelines.  

Figure 1. Structured abstract example [3] 

Unstructured abstracts are common in social science, humanities, and physical science journals. They usually have one paragraph and no specific structure or subheadings. These abstracts are commonly used for research papers that don’t report original work and therefore have a more flexible and narrative style.  

Figure 2. Unstructured abstract example [3] 

Descriptive abstracts are short (75–150 words) and provide an outline with only the most important points of research papers. They are used for shorter articles such as case reports, reviews, and opinions where space is at a premium, and rarely for original investigations. These abstracts don’t present the results but mainly list the topics covered.  

Here’s a sample abstract . [ 4]  

“Design of a Radio-Based System for Distribution Automation”  

A new survey by the Maryland Public Utilities Commission suggests that utilities have not effectively explained to consumers the benefits of smart meters. The two-year study of 86,000 consumers concludes that the long-term benefits of smart meters will not be realized until consumers understand the benefits of shifting some of their power usage to off-peak hours in response to the data they receive from their meters. The study presents recommendations for utilities and municipal governments to improve customer understanding of how to use the smart meters effectively.  

Keywords: smart meters, distribution systems, load, customer attitudes, power consumption, utilities  

Informative abstracts (structured or unstructured) give a complete detailed summary, including the main results, of the research paper and may or may not have subsections.   

Figure 3. Informative abstract example [5] 

Purpose of Abstracts in Research    

Abstracts in research have two main purposes—selection and indexing. [ 6,7]  

• Selection : Abstracts allow interested readers to quickly decide the relevance of a paper to gauge if they should read it completely.   
• Indexing : Most academic journal databases accessed through libraries enable you to search abstracts, allowing for quick retrieval of relevant articles and avoiding unnecessary search results. Therefore, abstracts must necessarily include the keywords that researchers may use to search for articles.  

Thus, a well-written, keyword-rich abstract can p ique readers’ interest and curiosity and help them decide whether they want to read the complete paper. It can also direct readers to articles of potential clinical and research interest during an online search.  

Contents of Abstracts in Research  

Abstracts in research papers summarize the main points of an article and are broadly categorized into four or five sections. Here are some details on how to write an abstract .   

Introduction/Background and/or Objectives  

This section should provide the following information:  

• What is already known about the subject?  
• What is not known about the subject or what does the study aim to investigate?  

The hypothesis or research question and objectives should be mentioned here. The Background sets the context for the rest of the paper and its length should be short so that the word count could be saved for the Results or other information directly pertaining to the study. The objective should be written in present or past simple tense.  

Examples:  

The antidepressant efficacy of desvenlafaxine (DV) has been established in 8-week, randomized controlled trials. The present study examined the continued efficacy of DV across 6 months of maintenance treatment . [ 1]  

Objective: To describe gastric and breast cancer risk estimates for individuals with CDH1 variants.  

Design, Setting, and Participants (or Materials and Methods)  

This section should provide information on the processes used and should be written in past simple tense because the process is already completed.  

A few important questions to be answered include:  

• What was the research design and setting?  
• What was the sample size and how were the participants sampled?  
• What treatments did the participants receive?  
• What were the data collection and data analysis dates?  
• What was the primary outcome measure?  

Hazard ratios (HRs) were estimated for each cancer type and used to calculate cumulative risks and risks per decade of life up to age 80 years.  

This section, written in either present or past simple tense, should be the longest and should describe the main findings of the study. Here’s an example of how descriptive the sentences should be:  

Avoid: Response rates differed significantly between diabetic and nondiabetic patients.  

Better: The response rate was higher in nondiabetic than in diabetic patients (49% vs 30%, respectively; P<0.01).  

This section should include the following information:  

• Total number of patients (included, excluded [exclusion criteria])  
• Primary and secondary outcomes, expressed in words, and supported by numerical data  
• Data on adverse outcomes  

Example: [ 8]  

In total, 10.9% of students were reported to have favorable study skills. The minimum score was found for preparation for examination domain. Also, a significantly positive correlation was observed between students’ study skills and their Grade Point Average (GPA) of previous term (P=0.001, r=0.269) and satisfaction with study skills (P=0.001, r=0.493).  

Conclusions  

Here, authors should mention the importance of their findings and also the practical and theoretical implications, which would benefit readers referring to this paper for their own research. Present simple tense should be used here.  

Examples: [ 1,8]  

The 9.3% prevalence of bipolar spectrum disorders in students at an arts university is substantially higher than general population estimates. These findings strengthen the oft-expressed hypothesis linking creativity with affective psychopathology.  

The findings indicated that students’ study skills need to be improved. Given the significant relationship between study skills and GPA, as an index of academic achievement, and satisfaction, it is necessary to promote the students’ study skills. These skills are suggested to be reinforced, with more emphasis on weaker domains.  

When to Write an Abstract  

In addition to knowing how to write an abstract , you should also know when to write an abstract . It’s best to write abstracts once the paper is completed because this would make it easier for authors to extract relevant parts from every section.  

Abstracts are usually required for: [ 7]    

• submitting articles to journals  
• applying for research grants   
• writing book proposals  
• completing and submitting dissertations  
• submitting proposals for conference papers  

Mostly, the author of the entire work writes the abstract (the first author, in works with multiple authors). However, there are professional abstracting services that hire writers to draft abstracts of other people’s work.   

How to Write an Abstract (Step-by-Step Process)  

Here are some key steps on how to write an abstract in research papers: [ 9]  

• Write the abstract after you’ve finished writing your paper.  
• Select the major objectives/hypotheses and conclusions from your Introduction and Conclusion sections.  
• Select key sentences from your Methods section.  
• Identify the major results from the Results section.  
• Paraphrase or re-write the sentences selected in steps 2, 3, and 4 in your own words into one or two paragraphs in the following sequence: Introduction/Objective, Methods, Results, and Conclusions. The headings may differ among journals, but the content remains the same.  
• Ensure that this draft does not contain: a.   new information that is not present in the paper b.   undefined abbreviations c.   a discussion of previous literature or reference citations d.   unnecessary details about the methods used  
• Remove all extra information and connect your sentences to ensure that the information flows well, preferably in the following order: purpose; basic study design, methodology and techniques used; major findings; summary of your interpretations, conclusions, and implications. Use section headings for structured abstracts.  
• Ensure consistency between the information presented in the abstract and the paper.  
• Check to see if the final abstract meets the guidelines of the target journal (word limit, type of abstract, recommended subheadings, etc.) and if all the required information has been included.  

Choosing Keywords for Abstracts  

Keywords [ 2] are the important and repeatedly used words and phrases in research papers and can help indexers and search engines find papers relevant to your requirements. Easy retrieval would help in reaching a wider audience and eventually gain more citations. In the fields of medicine and health, keywords should preferably be chosen from the Medical Subject Headings (MeSH) list of the US National Library of Medicine because they are used for indexing. These keywords need to be different from the words in the main title (automatically used for indexing) but can be variants of the terms/phrases used in the title, abstract, and the main text. Keywords should represent the content of your manuscript and be specific to your subject area.  

Basic tips for authors [ 10,11]  

• Read through your paper and highlight key terms or phrases that are most relevant and frequently used in your field, to ensure familiarity.  
• Several journals provide instructions about the length (eg, 3 words in a keyword) and maximum number of keywords allowed and other related rules. Create a list of keywords based on these instructions and include specific phrases containing 2 to 4 words. A longer string of words would yield generic results irrelevant to your field.  
• Use abbreviations, acronyms, and initializations if these would be more familiar.  
• Search with your keywords to ensure the results fit with your article and assess how helpful they would be to readers.  
• Narrow down your keywords to about five to ten, to ensure accuracy.  
• Finalize your list based on the maximum number allowed.  

  Few examples: [ 12]  

Important Tips for Writing an Abstract  

Here are a few tips on how to write an abstract to ensure that your abstract is complete, concise, and accurate. [ 1,2]  

• Write the abstract last.  
• Follow journal-specific formatting guidelines or Instructions to Authors strictly to ensure acceptance for publication.  
• Proofread the final draft meticulously to avoid grammatical or typographical errors.  
• Ensure that the terms or data mentioned in the abstract are consistent with the main text.  
• Include appropriate keywords at the end.

Do not include:  

• New information  
• Text citations to references  
• Citations to tables and figures  
• Generic statements  
• Abbreviations unless necessary, like a trial or study name  

Key Takeaways    

Here’s a quick snapshot of all the important aspects of how to write an abstract . [2]

• An abstract in research is a summary of the paper and describes only the main aspects. Typically, abstracts are about 200-350 words long.  
• Abstracts are of four types—structured, unstructured, descriptive, and informative.  
• Abstracts should be simple, clear, concise, independent, and unbiased (present both favorable and adverse outcomes).  
• They should adhere to the prescribed journal format, including word limits, section headings, number of keywords, fonts used, etc.  
• The terminology should be consistent with the main text.   
• Although the section heading names may differ for journals, every abstract should include a background and objective, analysis methods, primary results, and conclusions.  
• Nonstandard abbreviations, references, and URLs shouldn’t be included.  
• Only relevant and specific keywords should be used to ensure focused searches and higher citation frequency.  
• Abstracts should be written last after completing the main paper.  

Frequently Asked Questions   

Q1. Do all journals have different guidelines for abstracts?  

A1. Yes, all journals have their own specific guidelines for writing abstracts; a few examples are given in the following table. [ 6,13,14,15]  

Q2. What are the common mistakes to avoid when writing an abstract?  

A2. Listed below are a few mistakes that authors may make inadvertently while writing abstracts.  

• Copying sentences from the paper verbatim  

An abstract is a summary, which should be created by paraphrasing your own work or writing in your own words. Extracting sentences from every section and combining them into one paragraph cannot be considered summarizing.  

• Not adhering to the formatting guidelines  

Journals have special instructions for writing abstracts, such as word limits and section headings. These should be followed strictly to avoid rejections.  

• Not including the right amount of details in every section  

Both too little and too much information could discourage readers. For instance, if the Background has very little information, the readers may not get sufficient context to appreciate your research. Similarly, incomplete information in the Methods and a text-heavy Results section without supporting numerical data may affect the credibility of your research.  

• Including citations, standard abbreviations, and detailed measurements  

Typically, abstracts shouldn’t include these elements—citations, URLs, and abbreviations. Only nonstandard abbreviations are allowed or those that would be more familiar to readers than the expansions.  

• Including new information  

Abstracts should strictly include only the same information mentioned in the main text. Any new information should first be added to the text and then to the abstract only if necessary or if permitted by the word limit.  

• Not including keywords  

Keywords are essential for indexing and searching and should be included to increase the frequency of retrieval and citation.  

Q3. What is the difference between abstracts in research papers and conference abstracts? [16]  

A3. The table summarizes the main differences between research and conference abstracts.  

  Thus, abstracts are essential “trailers” that can market your research to a wide audience. The better and more complete the abstract the more are the chances of your paper being read and cited. By following our checklist and ensuring that all key elements are included, you can create a well-structured abstract that summarizes your paper accurately.  

References  

• Andrade C. How to write a good abstract for a scientific paper or conference presentation. Indian J Psychiatry . 2011; 53(2):172-175. Accessed June 14, 2024. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3136027/  
• Tullu MS. Writing the title and abstract for a research paper: Being concise, precise, and meticulous is the key. 2019; 13(Suppl 1): S12-S17. Accessed June 14, 2024. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6398294/  
• Zawia J. Writing an Academic Paper? Get to know Abstracts vs. Structured Abstracts. Medium. Published October 16, 2023. Accessed June 16, 2024. https://medium.com/@jamala.zawia/writing-an-academic-paper-get-to-know-abstracts-vs-structured-abstracts-11ed86888367  
• Markel M and Selber S. Technical Communication, 12 th edition. 2018; pp. 482. Bedford/St Martin’s.  
• Abstracts. Arkansas State University. Accessed June 17, 2024. https://www.astate.edu/a/global-initiatives/online/a-state-online-services/online-writing-center/resources/How%20to%20Write%20an%20Abstract1.pdf  
• AMA Manual of Style. 11 th edition. Oxford University Press.  
• Writing an Abstract. The University of Melbourne. Accessed June 16, 2024. https://services.unimelb.edu.au/__data/assets/pdf_file/0007/471274/Writing_an_Abstract_Update_051112.pdf  
• 10 Good Abstract Examples that will Kickstart Your Brain. Kibin Essay Writing Blog. Published April 5, 2017. Accessed June 17, 2024. https://www.kibin.com/essay-writing-blog/10-good-abstract-examples/  
• A 10-step guide to make your research paper abstract more effective. Editage Insights. Published October 16, 2013. Accessed June 17, 2024. https://www.editage.com/insights/a-10-step-guide-to-make-your-research-paper-abstract-more-effective  
• Using keywords to write your title and abstract. Taylor & Francis Author Services. Accessed June 15, 2024. https://authorservices.taylorandfrancis.com/publishing-your-research/writing-your-paper/using-keywords-to-write-title-and-abstract/  
• How to choose and use keywords in research papers. Paperpal by Editage blog. Published March 10, 2023. Accessed June 17, 2024. https://paperpal.com/blog/researcher-resources/phd-pointers/how-to-choose-and-use-keywords-in-research-papers  
• Title, abstract and keywords. Springer. Accessed June 16, 2024. https://www.springer.com/it/authors-editors/authorandreviewertutorials/writing-a-journal-manuscript/title-abstract-and-keywords/10285522  
• Abstract and keywords guide. APA Style, 7 th edition. Accessed June 18, 2024. https://apastyle.apa.org/instructional-aids/abstract-keywords-guide.pdf  
• Abstract guidelines. American Society for Microbiology. Accessed June 18, 2024. https://asm.org/events/asm-microbe/present/abstract-guidelines  
• Guidelines for conference abstracts. The Lancet. Accessed June 16, 2024. https://www.thelancet.com/pb/assets/raw/Lancet/pdfs/Abstract_Guidelines_2013.pdf  
• Is a conference abstract the same as a paper abstract? Global Conference Alliance, Inc. Accessed June 18, 2024. https://globalconference.ca/is-a-conference-abstract-the-same-as-a-paper-abstract/  

Paperpal is a comprehensive AI writing toolkit that helps students and researchers achieve 2x the writing in half the time. It leverages 21+ years of STM experience and insights from millions of research articles to provide in-depth academic writing, language editing, and submission readiness support to help you write better, faster.  

Get accurate academic translations, rewriting support, grammar checks, vocabulary suggestions, and generative AI assistance that delivers human precision at machine speed. Try for free or upgrade to Paperpal Prime starting at US$19 a month to access premium features, including consistency, plagiarism, and 30+ submission readiness checks to help you succeed.  

Experience the future of academic writing – Sign up to Paperpal and start writing for free!  

Related Reads:

• What are Journal Guidelines on Using Generative AI Tools
• How to Write a High-Quality Conference Paper

How to Write Dissertation Acknowledgements?

• How to Write the First Draft of a Research Paper with Paperpal? 

Top 7 AI Tools for Research 2024

You may also like, what is the purpose of an abstract why..., what are citation styles which citation style to..., what are the types of literature reviews , abstract vs introduction: what is the difference , mla format: guidelines, template and examples , machine translation vs human translation: which is reliable..., dissertation printing and binding | types & comparison , what is a dissertation preface definition and examples , how to write a research proposal: (with examples..., how to write your research paper in apa....

• Privacy Policy

Home » Term Paper – Format, Examples and Writing Guide

Term Paper – Format, Examples and Writing Guide

Table of Contents

A term paper is a critical academic writing assignment typically required at the end of a semester. It allows students to demonstrate their knowledge, research skills, and critical thinking abilities on a specific topic covered during the course. This guide will walk you through the basics of term paper formatting, provide examples, and give tips to help you write a compelling paper that meets academic standards.

A term paper is an analytical or interpretative report written on a specific topic, representing a student’s achievement over an academic term. It’s different from a research paper in that it often reflects the knowledge gained during a semester, focusing on course-related topics.

A well-written term paper involves thorough research, detailed analysis, and clear arguments. It should reflect the writer’s understanding of the topic, supported by evidence from credible sources. Typically, term papers contribute significantly to the final grade in a course.

Key Components of a Term Paper

A term paper generally follows a standardized structure that includes the following sections:

• Title Page The title page includes the title of the paper, the student’s name, course name, instructor’s name, and date. A well-designed title page gives a formal start to the term paper and sets a professional tone.
• Abstract The abstract is a concise summary (usually 150-250 words) of the term paper, covering the main points and objectives. It helps readers understand the paper’s purpose without reading the entire document.
• Introduction The introduction outlines the topic, research question, and the thesis statement. It also sets the context for the research, explaining why the topic is relevant and important.
• Literature Review This section summarizes existing research on the topic, highlighting relevant theories, frameworks, or models. A literature review shows that the writer has explored various perspectives and supports the need for their research.
• Methodology The methodology section describes the research approach, tools, or techniques used to gather and analyze data. Depending on the subject, it may involve surveys, experiments, or other research methods.
• Body/Analysis The main body provides an in-depth analysis, presenting arguments supported by evidence. Each paragraph should contain a topic sentence and relevant data or examples that relate to the thesis statement.
• Results Here, the results of the research or analysis are summarized. This section may include tables, graphs, or other visual elements to illustrate findings.
• Discussion In the discussion, the writer interprets the results and explains their implications, linking back to the thesis and literature review. This is where you highlight the significance of your findings.
• Conclusion The conclusion wraps up the paper, restating the thesis and summarizing key findings. It may also suggest areas for further research.
• References/Bibliography A complete list of all sources cited in the paper, formatted according to a specific citation style (e.g., APA, MLA, or Chicago). Using credible sources adds legitimacy to the research and allows others to explore further.

Formatting Your Term Paper

The formatting requirements for a term paper can vary by institution, but the following are common guidelines:

• Font : Use a legible font, typically Times New Roman or Arial, size 12.
• Margins : Set margins to 1 inch on all sides.
• Spacing : Double-spacing is standard, but follow your instructor’s guidelines.
• Page Numbers : Number pages consecutively, usually in the top right corner.
• Citation Style : Use a consistent citation style (APA, MLA, or Chicago) as specified by your instructor.

Example of a Term Paper Topic and Outline

Sample Topic : “The Impact of Climate Change on Coastal Ecosystems”

• Overview of climate change and its impact on ecosystems
• Research question and thesis statement
• Summary of previous research on climate change’s impact on coastal areas
• Key studies and findings
• Data sources, analysis tools, and methodology for studying coastal changes
• Effects of rising temperatures on marine biodiversity
• Impact of sea-level rise on coastal habitats
• Visual representation of changes in coastal ecosystems over time
• Interpretation of findings in relation to the literature
• Summary of the research and implications for conservation efforts

Tips for Writing an Effective Term Paper

• Choose a Manageable Topic Select a topic that is specific and narrow enough to be thoroughly explored within the constraints of the paper.
• Conduct Thorough Research Use reliable sources, such as academic journals, books, and reputable websites. Take detailed notes to organize the information you collect.
• Create an Outline An outline can help you structure your paper logically, ensuring each section flows smoothly into the next.
• Draft and Revise Begin with a rough draft, focusing on getting your ideas down. Once the draft is complete, revise for clarity, coherence, and grammar.
• Proofread Carefully Proofread your final draft multiple times to catch any errors or inconsistencies. Consider having someone else review it as well.
• Greetham, B. (2008). How to Write Better Essays . London: Palgrave Macmillan.
• Lester, J. D., & Lester, J. D. Jr. (2011). Writing Research Papers: A Complete Guide . New York: Pearson.
• Purdue Online Writing Lab (OWL). (n.d.). General Format . Purdue University. Retrieved from https://owl.purdue.edu/
• University of Chicago Press. (2017). The Chicago Manual of Style . Chicago: University of Chicago Press.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Economist – Definition, Types, Work Area

Idea – Definition, Types and Examples

What is Sociology – Definition and Overview

What is Chemistry – Definition, Types, Methods

Evolution – Definition, Types and Example

Predictive Analytics in Cyber Security –...

What this handout is about

This handout provides definitions and examples of the two main types of abstracts: descriptive and informative. It also provides guidelines for constructing an abstract and general tips for you to keep in mind when drafting. Finally, it includes a few examples of abstracts broken down into their component parts.

What is an abstract?

An abstract is a self-contained, short, and powerful statement that describes a larger work. Components vary according to discipline. An abstract of a social science or scientific work may contain the scope, purpose, results, and contents of the work. An abstract of a humanities work may contain the thesis, background, and conclusion of the larger work. An abstract is not a review, nor does it evaluate the work being abstracted. While it contains key words found in the larger work, the abstract is an original document rather than an excerpted passage.

Why write an abstract?

You may write an abstract for various reasons. The two most important are selection and indexing. Abstracts allow readers who may be interested in a longer work to quickly decide whether it is worth their time to read it. Also, many online databases use abstracts to index larger works. Therefore, abstracts should contain keywords and phrases that allow for easy searching.

Say you are beginning a research project on how Brazilian newspapers helped Brazil’s ultra-liberal president Luiz Ignácio da Silva wrest power from the traditional, conservative power base. A good first place to start your research is to search Dissertation Abstracts International for all dissertations that deal with the interaction between newspapers and politics. “Newspapers and politics” returned 569 hits. A more selective search of “newspapers and Brazil” returned 22 hits. That is still a fair number of dissertations. Titles can sometimes help winnow the field, but many titles are not very descriptive. For example, one dissertation is titled “Rhetoric and Riot in Rio de Janeiro.” It is unclear from the title what this dissertation has to do with newspapers in Brazil. One option would be to download or order the entire dissertation on the chance that it might speak specifically to the topic. A better option is to read the abstract. In this case, the abstract reveals the main focus of the dissertation:

This dissertation examines the role of newspaper editors in the political turmoil and strife that characterized late First Empire Rio de Janeiro (1827-1831). Newspaper editors and their journals helped change the political culture of late First Empire Rio de Janeiro by involving the people in the discussion of state. This change in political culture is apparent in Emperor Pedro I’s gradual loss of control over the mechanisms of power. As the newspapers became more numerous and powerful, the Emperor lost his legitimacy in the eyes of the people. To explore the role of the newspapers in the political events of the late First Empire, this dissertation analyzes all available newspapers published in Rio de Janeiro from 1827 to 1831. Newspapers and their editors were leading forces in the effort to remove power from the hands of the ruling elite and place it under the control of the people. In the process, newspapers helped change how politics operated in the constitutional monarchy of Brazil.

From this abstract you now know that although the dissertation has nothing to do with modern Brazilian politics, it does cover the role of newspapers in changing traditional mechanisms of power. After reading the abstract, you can make an informed judgment about whether the dissertation would be worthwhile to read.

Besides selection, the other main purpose of the abstract is for indexing. Most article databases in the online catalog of the library enable you to search abstracts. This allows for quick retrieval by users and limits the extraneous items recalled by a “full-text” search. However, for an abstract to be useful in an online retrieval system, it must incorporate the key terms that a potential researcher would use to search. For example, if you search Dissertation Abstracts International using the keywords “France” “revolution” and “politics,” the search engine would search through all the abstracts in the database that included those three words. Without an abstract, the search engine would be forced to search titles, which, as we have seen, may not be fruitful, or else search the full text. It’s likely that a lot more than 60 dissertations have been written with those three words somewhere in the body of the entire work. By incorporating keywords into the abstract, the author emphasizes the central topics of the work and gives prospective readers enough information to make an informed judgment about the applicability of the work.

When do people write abstracts?

• when submitting articles to journals, especially online journals
• when applying for research grants
• when writing a book proposal
• when completing the Ph.D. dissertation or M.A. thesis
• when writing a proposal for a conference paper
• when writing a proposal for a book chapter

Most often, the author of the entire work (or prospective work) writes the abstract. However, there are professional abstracting services that hire writers to draft abstracts of other people’s work. In a work with multiple authors, the first author usually writes the abstract. Undergraduates are sometimes asked to draft abstracts of books/articles for classmates who have not read the larger work.

Types of abstracts

There are two types of abstracts: descriptive and informative. They have different aims, so as a consequence they have different components and styles. There is also a third type called critical, but it is rarely used. If you want to find out more about writing a critique or a review of a work, see the UNC Writing Center handout on writing a literature review . If you are unsure which type of abstract you should write, ask your instructor (if the abstract is for a class) or read other abstracts in your field or in the journal where you are submitting your article.

Descriptive abstracts

A descriptive abstract indicates the type of information found in the work. It makes no judgments about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract describes the work being abstracted. Some people consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short—100 words or less.

Informative abstracts

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the writer presents and explains all the main arguments and the important results and evidence in the complete article/paper/book. An informative abstract includes the information that can be found in a descriptive abstract (purpose, methods, scope) but also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is rarely more than 10% of the length of the entire work. In the case of a longer work, it may be much less.

Here are examples of a descriptive and an informative abstract of this handout on abstracts . Descriptive abstract:

The two most common abstract types—descriptive and informative—are described and examples of each are provided.

Informative abstract:

Abstracts present the essential elements of a longer work in a short and powerful statement. The purpose of an abstract is to provide prospective readers the opportunity to judge the relevance of the longer work to their projects. Abstracts also include the key terms found in the longer work and the purpose and methods of the research. Authors abstract various longer works, including book proposals, dissertations, and online journal articles. There are two main types of abstracts: descriptive and informative. A descriptive abstract briefly describes the longer work, while an informative abstract presents all the main arguments and important results. This handout provides examples of various types of abstracts and instructions on how to construct one.

Which type should I use?

Your best bet in this case is to ask your instructor or refer to the instructions provided by the publisher. You can also make a guess based on the length allowed; i.e., 100-120 words = descriptive; 250+ words = informative.

How do I write an abstract?

The format of your abstract will depend on the work being abstracted. An abstract of a scientific research paper will contain elements not found in an abstract of a literature article, and vice versa. However, all abstracts share several mandatory components, and there are also some optional parts that you can decide to include or not. When preparing to draft your abstract, keep the following key process elements in mind:

• Reason for writing: What is the importance of the research? Why would a reader be interested in the larger work?
• Problem: What problem does this work attempt to solve? What is the scope of the project? What is the main argument/thesis/claim?
• Methodology: An abstract of a scientific work may include specific models or approaches used in the larger study. Other abstracts may describe the types of evidence used in the research.
• Results: Again, an abstract of a scientific work may include specific data that indicates the results of the project. Other abstracts may discuss the findings in a more general way.
• Implications: What changes should be implemented as a result of the findings of the work? How does this work add to the body of knowledge on the topic?

(This list of elements is adapted with permission from Philip Koopman, “How to Write an Abstract.” )

All abstracts include:

• A full citation of the source, preceding the abstract.
• The most important information first.
• The same type and style of language found in the original, including technical language.
• Key words and phrases that quickly identify the content and focus of the work.
• Clear, concise, and powerful language.

Abstracts may include:

• The thesis of the work, usually in the first sentence.
• Background information that places the work in the larger body of literature.
• The same chronological structure as the original work.

How not to write an abstract:

• Do not refer extensively to other works.
• Do not add information not contained in the original work.
• Do not define terms.

If you are abstracting your own writing

When abstracting your own work, it may be difficult to condense a piece of writing that you have agonized over for weeks (or months, or even years) into a 250-word statement. There are some tricks that you could use to make it easier, however.

Reverse outlining:

This technique is commonly used when you are having trouble organizing your own writing. The process involves writing down the main idea of each paragraph on a separate piece of paper– see our short video . For the purposes of writing an abstract, try grouping the main ideas of each section of the paper into a single sentence. Practice grouping ideas using webbing or color coding .

For a scientific paper, you may have sections titled Purpose, Methods, Results, and Discussion. Each one of these sections will be longer than one paragraph, but each is grouped around a central idea. Use reverse outlining to discover the central idea in each section and then distill these ideas into one statement.

Cut and paste:

To create a first draft of an abstract of your own work, you can read through the entire paper and cut and paste sentences that capture key passages. This technique is useful for social science research with findings that cannot be encapsulated by neat numbers or concrete results. A well-written humanities draft will have a clear and direct thesis statement and informative topic sentences for paragraphs or sections. Isolate these sentences in a separate document and work on revising them into a unified paragraph.

If you are abstracting someone else’s writing

When abstracting something you have not written, you cannot summarize key ideas just by cutting and pasting. Instead, you must determine what a prospective reader would want to know about the work. There are a few techniques that will help you in this process:

Identify key terms:

Search through the entire document for key terms that identify the purpose, scope, and methods of the work. Pay close attention to the Introduction (or Purpose) and the Conclusion (or Discussion). These sections should contain all the main ideas and key terms in the paper. When writing the abstract, be sure to incorporate the key terms.

Highlight key phrases and sentences:

Instead of cutting and pasting the actual words, try highlighting sentences or phrases that appear to be central to the work. Then, in a separate document, rewrite the sentences and phrases in your own words.

Don’t look back:

After reading the entire work, put it aside and write a paragraph about the work without referring to it. In the first draft, you may not remember all the key terms or the results, but you will remember what the main point of the work was. Remember not to include any information you did not get from the work being abstracted.

Revise, revise, revise

No matter what type of abstract you are writing, or whether you are abstracting your own work or someone else’s, the most important step in writing an abstract is to revise early and often. When revising, delete all extraneous words and incorporate meaningful and powerful words. The idea is to be as clear and complete as possible in the shortest possible amount of space. The Word Count feature of Microsoft Word can help you keep track of how long your abstract is and help you hit your target length.

Example 1: Humanities abstract

Kenneth Tait Andrews, “‘Freedom is a constant struggle’: The dynamics and consequences of the Mississippi Civil Rights Movement, 1960-1984” Ph.D. State University of New York at Stony Brook, 1997 DAI-A 59/02, p. 620, Aug 1998

This dissertation examines the impacts of social movements through a multi-layered study of the Mississippi Civil Rights Movement from its peak in the early 1960s through the early 1980s. By examining this historically important case, I clarify the process by which movements transform social structures and the constraints movements face when they try to do so. The time period studied includes the expansion of voting rights and gains in black political power, the desegregation of public schools and the emergence of white-flight academies, and the rise and fall of federal anti-poverty programs. I use two major research strategies: (1) a quantitative analysis of county-level data and (2) three case studies. Data have been collected from archives, interviews, newspapers, and published reports. This dissertation challenges the argument that movements are inconsequential. Some view federal agencies, courts, political parties, or economic elites as the agents driving institutional change, but typically these groups acted in response to the leverage brought to bear by the civil rights movement. The Mississippi movement attempted to forge independent structures for sustaining challenges to local inequities and injustices. By propelling change in an array of local institutions, movement infrastructures had an enduring legacy in Mississippi.

Now let’s break down this abstract into its component parts to see how the author has distilled his entire dissertation into a ~200 word abstract.

What the dissertation does This dissertation examines the impacts of social movements through a multi-layered study of the Mississippi Civil Rights Movement from its peak in the early 1960s through the early 1980s. By examining this historically important case, I clarify the process by which movements transform social structures and the constraints movements face when they try to do so.

How the dissertation does it The time period studied in this dissertation includes the expansion of voting rights and gains in black political power, the desegregation of public schools and the emergence of white-flight academies, and the rise and fall of federal anti-poverty programs. I use two major research strategies: (1) a quantitative analysis of county-level data and (2) three case studies.

What materials are used Data have been collected from archives, interviews, newspapers, and published reports.

Conclusion This dissertation challenges the argument that movements are inconsequential. Some view federal agencies, courts, political parties, or economic elites as the agents driving institutional change, but typically these groups acted in response to movement demands and the leverage brought to bear by the civil rights movement. The Mississippi movement attempted to forge independent structures for sustaining challenges to local inequities and injustices. By propelling change in an array of local institutions, movement infrastructures had an enduring legacy in Mississippi.

Keywords social movements Civil Rights Movement Mississippi voting rights desegregation

Example 2: Science Abstract

Luis Lehner, “Gravitational radiation from black hole spacetimes” Ph.D. University of Pittsburgh, 1998 DAI-B 59/06, p. 2797, Dec 1998

The problem of detecting gravitational radiation is receiving considerable attention with the construction of new detectors in the United States, Europe, and Japan. The theoretical modeling of the wave forms that would be produced in particular systems will expedite the search for and analysis of detected signals. The characteristic formulation of GR is implemented to obtain an algorithm capable of evolving black holes in 3D asymptotically flat spacetimes. Using compactification techniques, future null infinity is included in the evolved region, which enables the unambiguous calculation of the radiation produced by some compact source. A module to calculate the waveforms is constructed and included in the evolution algorithm. This code is shown to be second-order convergent and to handle highly non-linear spacetimes. In particular, we have shown that the code can handle spacetimes whose radiation is equivalent to a galaxy converting its whole mass into gravitational radiation in one second. We further use the characteristic formulation to treat the region close to the singularity in black hole spacetimes. The code carefully excises a region surrounding the singularity and accurately evolves generic black hole spacetimes with apparently unlimited stability.

This science abstract covers much of the same ground as the humanities one, but it asks slightly different questions.

Why do this study The problem of detecting gravitational radiation is receiving considerable attention with the construction of new detectors in the United States, Europe, and Japan. The theoretical modeling of the wave forms that would be produced in particular systems will expedite the search and analysis of the detected signals.

What the study does The characteristic formulation of GR is implemented to obtain an algorithm capable of evolving black holes in 3D asymptotically flat spacetimes. Using compactification techniques, future null infinity is included in the evolved region, which enables the unambiguous calculation of the radiation produced by some compact source. A module to calculate the waveforms is constructed and included in the evolution algorithm.

Results This code is shown to be second-order convergent and to handle highly non-linear spacetimes. In particular, we have shown that the code can handle spacetimes whose radiation is equivalent to a galaxy converting its whole mass into gravitational radiation in one second. We further use the characteristic formulation to treat the region close to the singularity in black hole spacetimes. The code carefully excises a region surrounding the singularity and accurately evolves generic black hole spacetimes with apparently unlimited stability.

Keywords gravitational radiation (GR) spacetimes black holes

Works consulted

We consulted these works while writing this handout. This is not a comprehensive list of resources on the handout’s topic, and we encourage you to do your own research to find additional publications. Please do not use this list as a model for the format of your own reference list, as it may not match the citation style you are using. For guidance on formatting citations, please see the UNC Libraries citation tutorial . We revise these tips periodically and welcome feedback.

Belcher, Wendy Laura. 2009. Writing Your Journal Article in Twelve Weeks: A Guide to Academic Publishing Success. Thousand Oaks, CA: Sage Press.

Koopman, Philip. 1997. “How to Write an Abstract.” Carnegie Mellon University. October 1997. http://users.ece.cmu.edu/~koopman/essays/abstract.html .

Lancaster, F.W. 2003. Indexing And Abstracting in Theory and Practice , 3rd ed. London: Facet Publishing.

You may reproduce it for non-commercial use if you use the entire handout and attribute the source: The Writing Center, University of North Carolina at Chapel Hill

Make a Gift

Magnum Proofreading Services

Writing an Abstract for a Research Paper: Guidelines, Examples, and Templates

There are six steps to writing a standard abstract. (1) Begin with a broad statement about your topic. Then, (2) state the problem or knowledge gap related to this topic that your study explores. After that, (3) describe what specific aspect of this problem you investigated, and (4) briefly explain how you went about doing this. After that, (5) describe the most meaningful outcome(s) of your study. Finally, (6) close your abstract by explaining the broad implication(s) of your findings.

In this article, I present step-by-step guidelines for writing an abstract for an academic paper. These guidelines are fo llowed by an example of a full abstract that follows these guidelines and a few fill-in-the-blank templates that you can use to write your own abstract.

Guidelines for Writing an Abstract

The basic structure of an abstract is illustrated below.

A standard abstract starts with a very general statement and becomes more specific with each sentence that follows until once again making a broad statement about the study’s implications at the end. Altogether, a standard abstract has six functions, which are described in detail below.

Start by making a broad statement about your topic.

The first sentence of your abstract should briefly describe a problem that is of interest to your readers. When writing this first sentence, you should think about who comprises your target audience and use terms that will appeal to this audience. If your opening sentence is too broad, it might lose the attention of potential readers because they will not know if your study is relevant to them.

Too broad : Maintaining an ideal workplace environment has a positive effect on employees.

The sentence above is so broad that it will not grab the reader’s attention. While it gives the reader some idea of the area of study, it doesn’t provide any details about the author’s topic within their research area. This can be fixed by inserting some keywords related to the topic (these are underlined in the revised example below).

Improved : Keeping the workplace environment at an ideal temperature positively affects the overall health of employees.

The revised sentence is much better, as it expresses two points about the research topic—namely, (i) what aspect of workplace environment was studied, (ii) what aspect of employees was observed. The mention of these aspects of the research will draw the attention of readers who are interested in them.

Describe the general problem that your paper addresses.

After describing your topic in the first sentence, you can then explain what aspect of this topic has motivated your research. Often, authors use this part of the abstract to describe the research gap that they identified and aimed to fill. These types of sentences are often characterized by the use of words such as “however,” “although,” “despite,” and so on.

However, a comprehensive understanding of how different workplace bullying experiences are associated with absenteeism is currently lacking.

The above example is typical of a sentence describing the problem that a study intends to tackle. The author has noticed that there is a gap in the research, and they briefly explain this gap here.

Although it has been established that quantity and quality of sleep can affect different types of task performance and personal health, the interactions between sleep habits and workplace behaviors have received very little attention.

The example above illustrates a case in which the author has accomplished two tasks with one sentence. The first part of the sentence (up until the comma) mentions the general topic that the research fits into, while the second part (after the comma) describes the general problem that the research addresses.

Express the specific problem investigated in your paper.

After describing the general problem that motivated your research, the next sentence should express the specific aspect of the problem that you investigated. Sentences of this type are often indicated by the use of phrases like “the purpose of this research is to,” “this paper is intended to,” or “this work aims to.”

Uninformative : However, a comprehensive understanding of how different workplace bullying experiences are associated with absenteeism is currently lacking. The present article aimed to provide new insights into the relationship between workplace bullying and absenteeism .

The second sentence in the above example is a mere rewording of the first sentence. As such, it adds nothing to the abstract. The second sentence should be more specific than the preceding one.

Improved : However, a comprehensive understanding of how different workplace bullying experiences are associated with absenteeism is currently lacking. The present article aimed to define various subtypes of workplace bullying and determine which subtypes tend to lead to absenteeism .

The second sentence of this passage is much more informative than in the previous example. This sentence lets the reader know exactly what they can expect from the full research article.

Explain how you attempted to resolve your study’s specific problem.

In this part of your abstract, you should attempt to describe your study’s methodology in one or two sentences. As such, you must be sure to include only the most important information about your method. At the same time, you must also be careful not to be too vague.

Too vague : We conducted multiple tests to examine changes in various factors related to well-being.

This description of the methodology is too vague. Instead of merely mentioning “tests” and “factors,” the author should note which specific tests were run and which factors were assessed.

Improved : Using data from BHIP completers, we conducted multiple one-way multivariate analyses of variance and follow-up univariate t-tests to examine changes in physical and mental health, stress, energy levels, social satisfaction, self-efficacy, and quality of life.

This sentence is very well-written. It packs a lot of specific information about the method into a single sentence. Also, it does not describe more details than are needed for an abstract.

Briefly tell the reader what you found by carrying out your study.

This is the most important part of the abstract—the other sentences in the abstract are there to explain why this one is relevant. When writing this sentence, imagine that someone has asked you, “What did you find in your research?” and that you need to answer them in one or two sentences.

Too vague : Consistently poor sleepers had more health risks and medical conditions than consistently optimal sleepers.

This sentence is okay, but it would be helpful to let the reader know which health risks and medical conditions were related to poor sleeping habits.

Improved : Consistently poor sleepers were more likely than consistently optimal sleepers to suffer from chronic abdominal pain, and they were at a higher risk for diabetes and heart disease.

This sentence is better, as the specific health conditions are named.

Finally, describe the major implication(s) of your study.

Most abstracts end with a short sentence that explains the main takeaway(s) that you want your audience to gain from reading your paper. Often, this sentence is addressed to people in power (e.g., employers, policymakers), and it recommends a course of action that such people should take based on the results.

Too broad : Employers may wish to make use of strategies that increase employee health.

This sentence is too broad to be useful. It does not give employers a starting point to implement a change.

Improved : Employers may wish to incorporate sleep education initiatives as part of their overall health and wellness strategies.

This sentence is better than the original, as it provides employers with a starting point—specifically, it invites employers to look up information on sleep education programs.

Abstract Example

The abstract produced here is from a paper published in Electronic Commerce Research and Applications . I have made slight alterations to the abstract so that this example fits the guidelines given in this article.

(1) Gamification can strengthen enjoyment and productivity in the workplace. (2) Despite this, research on gamification in the work context is still limited. (3) In this study, we investigated the effect of gamification on the workplace enjoyment and productivity of employees by comparing employees with leadership responsibilities to those without leadership responsibilities. (4) Work-related tasks were gamified using the habit-tracking game Habitica, and data from 114 employees were gathered using an online survey. (5) The results illustrated that employees without leadership responsibilities used work gamification as a trigger for self-motivation, whereas employees with leadership responsibilities used it to improve their health. (6) Work gamification positively affected work enjoyment for both types of employees and positively affected productivity for employees with leadership responsibilities. (7) Our results underline the importance of taking work-related variables into account when researching work gamification.

In Sentence (1), the author makes a broad statement about their topic. Notice how the nouns used (“gamification,” “enjoyment,” “productivity”) are quite general while still indicating the focus of the paper. The author uses Sentence (2) to very briefly state the problem that the research will address.

In Sentence (3), the author explains what specific aspects of the problem mentioned in Sentence (2) will be explored in the present work. Notice that the mention of leadership responsibilities makes Sentence (3) more specific than Sentence (2). Sentence (4) gets even more specific, naming the specific tools used to gather data and the number of participants.

Sentences (5) and (6) are similar, with each sentence describing one of the study’s main findings. Then, suddenly, the scope of the abstract becomes quite broad again in Sentence (7), which mentions “work-related variables” instead of a specific variable and “researching” instead of a specific kind of research.

Abstract Templates

Copy and paste any of the paragraphs below into a word processor. Then insert the appropriate information to produce an abstract for your research paper.

Template #1

Researchers have established that [Make a broad statement about your area of research.] . However, [Describe the knowledge gap that your paper addresses.] . The goal of this paper is to [Describe the purpose of your paper.] . The achieve this goal, we [Briefly explain your methodology.] . We found that [Indicate the main finding(s) of your study; you may need two sentences to do this.] . [Provide a broad implication of your results.] .

Template #2

It is well-understood that [Make a broad statement about your area of research.] . Despite this, [Describe the knowledge gap that your paper addresses.] . The current research aims to [Describe the purpose of your paper.] . To accomplish this, we [Briefly explain your methodology.] . It was discovered that [Indicate the main finding(s) of your study; you may need two sentences to do this.] . [Provide a broad implication of your results.] .

Template #3

Extensive research indicates that [Make a broad statement about your area of research.] . Nevertheless, [Describe the knowledge gap that your paper addresses.] . The present work is intended to [Describe the purpose of your paper.] . To this end, we [Briefly explain your methodology.] . The results revealed that [Indicate the main finding(s) of your study; you may need two sentences to do this.] . [Provide a broad implication of your results.] .

• How to Write an Abstract

Related Posts

How to Write a Research Paper in English: A Guide for Non-native Speakers

How to Write an Abstract Quickly

Using the Present Tense and Past Tense When Writing an Abstract

1 commentaire

Well explained! I have given you a credit

• Our Mission
• Code of Conduct
• The Consultants
• Hours and Locations
• Apply to Become a Consultant
• Make an Appointment
• Face-to-Face Appointments
• Zoom Appointments
• Written Feedback Appointments
• Support for Writers with Disabilities
• Policies and Restrictions
• Upcoming Workshops
• Class Workshops
• Meet the Consultants
• Writing Center Quick Guides
• Citation Resources
• Helpful Links
• Video Resources
• Login or Register
• Graduate Writing Consultations
• Thesis and Dissertation Consultations
• Weekly Write-Ins
• ESOL Graduate Peer Feedback Groups
• Setting Up Your Own Writing Group
• Writing Resources for Graduate Students
• Support for Multilingual Students
• ESOL Opt-In Program
• About Our Consulting Services
• Promote Us to Your Students
• Recommend Consultants

Writing an Abstract

What is an abstract.

An abstract is a 150- to 250-word paragraph that provides readers with a quick overview of your essay or report and its organization. It should express your thesis (or central idea) and your key points; it should also suggest any implications or applications of the research you discuss in the paper.

According to Carole Slade, an abstract is “a concise summary of the entire paper.”

The function of an abstract is to describe, not to evaluate or defend, the paper.

The abstract should begin with a brief but precise statement of the problem or issue, followed by a description of the research method and design, the major findings, and the conclusions reached.

The abstract should contain the most important key words referring to method and content: these facilitate access to the abstract by computer search and enable a reader to decide whether to read the entire dissertation.

Note: Your abstract should read like an overview of your paper, not a proposal for what you intended to study or accomplish. Avoid beginning your sentences with phrases like, “This essay will examine...” or “In this research paper I will attempt to prove...”  

(The examples above are taken from Form and Style (10th ed.), by Carole Slade; The Scott, Foresman Handbook for Writers (5th ed.); and the Publication Manual of the American Psychological Association (5th ed.).)

Note: The following are specifications for an abstract in APA style, used in the social sciences, such as psychology or anthropology. If you are in another discipline, check with your professor about the format for the abstract.

Writing an Abstract for an IMRaD Paper

Many papers in the social sciences, natural sciences, and engineering sciences follow IMRaD structure: their main sections are entitled Introduction, Methods, Results, and Discussion. People use the abstract to decide whether to read the rest of the paper, so the abstract for such a paper is important.

Because the abstract provides the highlights of the paper, you should draft your abstract after you have written a full draft of the paper. Doing so, you can summarize what you’ve already written in the paper as you compose the abstract.

Typically, an abstract for an IMRaD paper or presentation is one or two paragraphs long (120 – 500 words). Abstracts usually spend

25% of their space on the purpose and importance of the research (Introduction)

25% of their space on what you did (Methods)

35% of their space on what you found (Results)

15% of their space on the implications of the research

Sample IMRaD abstract:

Try to avoid these common problems in IMRaD abstracts:

1. The abstract provides a statement of what the paper will ask or explore rather than what it found:

X This report examines the causes of oversleeping. (What did it find out about these causes?) √ Individuals oversleep because they go to bed too late, forget to set their alarms, and keep their rooms dark.

2. The abstract provides general categories rather than specific details in the findings:

X The study draws conclusions about which variables are most important in choosing a movie theater. (What, specifically, are these variables?)

√ The study concludes that the most important variables in choosing a movie theater are comfortable seats and high-quality popcorn.

The Writing Center --> --> --> --> --> --> --> --> -->

4400 University Drive, 2G8 Fairfax, VA 22030

• Johnson Center, Room 227E
• +1-703-993-1200
• [email protected]

Quick Links

• Register with us

© Copyright 2024 George Mason University . All Rights Reserved. Privacy Statement | Accessibility